EOT Cranes Double Girder

Maximum stability for low dead weight owing to box girder design.
Geometrically reliable during assembly owing bolted design.
Ideal for operator cab control.
Can be fitted with walkways and assembly platforms and thus also suitable for maintaining workshop fittings.
Technical Data :
Load capacity 5 Tons to 80 Tons.
Span: 5 mtrs. to 30 mtrs.
Travel speeds: 10 to 30 mtrs. / min

Gantry Crane - Single Girder

These are used wherever columns of crane tracks are obstacles or due to long ways and
considerable lifting heights. These are used for Container handling, Granite Industry,
Shipbuilding industry, Scrap Yards, Ports Shipping Yards etc. Gantry Cranes offer an
economical solution to bridge cranes when the building is inadequate to support a
bridge crane or the crane system is to be located outdoors..

Gantry Crane - Double Girder

These are used wherever columns of crane tracks are obstacles or due to long ways and considerable lifting heights. These are used for Container handling, Granite Industry, Shipbuilding industry, Scrap Yards, Ports Shipping Yards etc. Gantry Cranes offer an economical solution to bridge cranes when the building is inadequate to support a bridge crane or the crane system is to be located outdoors..

Semi Gantry Cranes

Semi Gantry Cranes

A semi-gantry crane is one type of crane that is mounted on a fixed pylon on one side and travels on wheels on rails on the other side. This particular construction of the system allows for shifting and transferring heavy loads from one area to the other. The amount of load that a semi-gantry crane can move is strictly dependent on the size and technology of the model that has been developed.

Normally, semi-gantry cranes are employed where there is not enough room for a complete Gantry crane, but there is a necessity to move heavy loads. In this manner, effective and economical use of space is achieved.

A semi-gantry crane resembles a gantry crane in appearance and function, but one arm is not supported on one side. Instead of this, the horizontal rail is not laid out on the floor but is fixed to a wall, pillars, or beam which are placed on the wall of the hall in the same manner as a bridge crane.

This design gives the semi-gantry crane more flexibility and enables greater reach than conventional gantry cranes.

Finally, this allows a semi-gantry crane to carry out work in places unreachable by a gantry crane.

Semi-gantry cranes are continuously gaining popularity in industrial applications owing to the numerous advantages they offer.

Its capacity to bear and handle loads is enhanced and does not compromise its core features. A semi-gantry crane makes it possible to move and accurately position large loads which has the effect of improving the efficiency and safety aspects of working processes in diverse application areas.

Besides, a semi-gantry crane can be used in different working environments which may include factory floors, port facilities, or open storage spaces. Such flexibility makes the semi-gantry crane especially useful for organizations that require rapid and effective shifting of their materials.

JIB CRANES (SELF SUPPORTED AND WALL MOUNTED )

ABCO – JIB CRANES helps to cut setting up and idle times and reduce unnecessary waiting times at workplace/machines.

Coil Transfer Car

Coil Transfer Car helps to cut setting up and idle times and reduce unnecessary waiting times at workplace/machines.

Pipe Transfer Car

Pipe Transfer Car helps to cut setting up and idle times and reduce unnecessary waiting times at workplace/machines.

Underslung/Suspension Cranes

Can be fitted to the existing roof structure.
 Overhead handling for large workshop areas without the need for runway columns.
 Cantilever arms can be used.
 Technical Data:
Load capacity 0.5 Ton to 5 Tons.
Span: 5 mtrs. to 10 mtrs.
Travel speeds: 5 mtrs. to 20 mtrs./min.

Balance C-Hook

ABCO balanced ‘C’ Hooks are engineered to meet the specific requirements of the
customer's operating environment.
 Featuring unitized construction for strength, durability, and safety, ABCO offers a variety
of ‘C’ Hook configurations to permit the greatest utility.

Goods Lift

ABCO Goods Lift is the right equipment For handling, storing and assembling Orders.
Specialized handling equipment for warehouse and factory store.
LIFTS offers high performance and surability with a proven
Electromechanical design.
Engineered to meet your
Exact application and height Requirements.
Heavy duty construction providesSuperior strength,reliability and Long term performance.
Built with advanced safety features to protect workers and materials.
Technical Data :
Load capacity: 0.5 Ton to 1 Ton

MONORAIL SYSTEM

ABCO Mono makes it possible to implement economical and reliable material handling solutions
Utilize the free space above working and production area.
Mono installations can be simply suspended from the building roof allowing overhead handling
directly to the required destinations.
No valuable floor space is lost to runway columns or traffic lanes. And you can arrange your
workplace for maximum efficiency.

ELECTRIC WIRE ROPE HOIST

ABCO hoist is recognized as being one of the most reliable and of the highest quality all over India.
• Our hoists are designed and built to comply with all safety/ISI standards and regulations.
• Technical Data:
Load capacity: 0.5 Ton to 20 Tons
Travel Speed: 10 to 20 mtrs./ min.
Hoist Speed : 3 to 10 mtrs./min.

POWER WINCHES

ABCO manufacturers & supplies a comprehensive range of electric, hydraulic and pneumatically operated winches and pneumatic Lifts which are suitable for a wide range of applications including construction, mining, marine, offshore oil rigs, exploration and a host of other applicable areas.

CRAB ASSEMBLY

ABCO Crab Assembly with micro speed kits is designed to support the material handling more effectively.

Lifting Tackle

ABCO designs,manufacturers& supplies various types of customized Lifting Tackle to suit all Customer’s requirement.